Compartment Divider & Separator 950x55x10 mm – Pallet Box/Pallet Collar – lock-it© HD MAXI55M Slot-In Divider Strip
The 950x55x10 mm plastic compartment divider & separator is a robust, cut-to-size slot-in divider strip for subdividing pallet boxes, pallet collars, GLTs, Palox containers, large load carriers, containers and crates. As a lock-it© HD MAXI55M slot-in divider strip, it forms a variable plastic compartment grid for the organised storage, sorting, staging and internal transport of technical components.
Typical applications include turned parts, milled parts, shafts, bushes, rings, flanges, fittings, fasteners, plastic parts as well as painted, coated or powder-coated components. The 55 mm high and 10 mm thick separator slot-in divider strip is particularly suitable for flatter to medium-height components that need to remain easily accessible while still being laterally separated from one another.
Anyone wishing to subdivide a pallet box, equip a pallet collar with compartments or create a compartment grid for GLTs can cut the 950 mm long strip to the usable internal dimension and combine it longitudinally and transversely with additional slot-in divider strips. The 28 mm grid enables uniform or mixed compartment sizes that can be adapted to component geometry, quantity, removal method and process workflow.
In many production, storage and logistics areas, components are staged loose in pallet boxes, transport containers or on pallets with plastic pallet collars. As a result, parts can shift, become mixed, rub against one another or require considerable time to remove and assign. A compartment divider or separator creates a clearly recognisable internal structure and supports repeatable compartment positions, standardised material flows and organised component staging.
MAXI55M Explained Briefly
- What Is MAXI55M? A modular slot-in plastic compartment divider and separator strip made from PP/PE recycled material mix.
- What Is It Used For? For creating compartment grids and separation systems in pallet boxes, GLTs, Paloxes, containers, crates and pallets with plastic pallet collars.
- What Are the Dimensions of the Strip? 950 mm length, 55 mm height and 10 mm thickness.
- What Grid Is Used? 28 mm for repeatable and flexibly combinable compartment spacing.
- Which Components Can Be Separated? Including turned parts, milled parts, shafts, fittings, plastic parts, assemblies and surface-sensitive components.
Plastic Compartment Grids, Separators and Slot-In Divider Strips for Containers and Crates
The terms compartment divider, separator, compartment grid and slot-in divider strip describe different levels of the same divider system. The individual MAXI55M strip is a compartment divider or separator slot-in divider strip. Several strips slotted together longitudinally and transversely form a plastic compartment grid, a divider comb or a modular container subdivision.
Depending on the operation and application, different terms are used for such subdivisions. MAXI55M is suitable both for general containers and crates and specifically for pallet boxes, GLTs, Palox containers and pallet collars. The decisive factors are the usable internal dimension, the required compartment size and the properties of the components to be stored.
Further designs and system variants can be found in the category Plastic Compartment Grids, Compartment Dividers, Separators and Slot-In Divider Strips. For robust large-container applications, the subcategory MAXI – lock-it© Compartment Dividers for GLTs, Pallet Boxes and Plastic Pallet Collars provides access to the available heights and lengths.
Typical Terms and Applications
- Compartment dividers for pallet boxes and large load carriers
- Separators for plastic pallet collars and pallet frames
- Plastic compartment grids for containers and crates
- Slot-in divider strips for separating components in GLTs and Paloxes
- Divider combs and subdividers for technical series-production parts
- Modular compartment division for storage, production and transport
Technical Data for the 950x55x10 mm Compartment Divider & Separator – MAXI55M
The lock-it© HD MAXI55M slot-in divider strip is part of the robust MAXI system for larger containers, pallet boxes, pallet collars and industrial load carriers. It was developed for applications requiring a robust, cut-to-size and modular slot-together compartment division.
Technical features
- Product Type: Slot-In Divider Strip, Separator, Divider Comb, Subdivider
- System: lock-it© HD MAXI55M
- SKU.: 40012
- Length: 950 mm
- Height: 55 mm
- Thickness: 10 mm
- Grid: 28 mm
- Weight: approx. 0.320 kg
- Material: Plastic, PP/PE recycled material mix
- Colour: black
- Design: can be cut to size and assembled modularly
- Application: GLTs, pallet boxes, Paloxes, plastic pallet collars, large load carriers, crates and transport containers
- Virgin material / ESD: on request, minimum total weight 500 kg
- Special colours: on request, minimum total weight 500 kg
The 28 mm grid enables repeatable and flexible compartment division. The slot-in divider strips can be arranged lengthwise or crosswise and connected to one another at the designated intersection points. This allows the compartment division to be adapted to component dimensions, quantities, container internal dimensions and process requirements.
What Is a 950x55x10 mm Compartment Divider & Separator – MAXI55M Used For?
A compartment divider & separator is used to subdivide large containers, crates, pallet boxes, Paloxes or pallet-based load units into individual storage compartments. The aim is to provide clear separation and assignment of the stored components. Particularly for series-production parts, technical components and different article variants, a plastic compartment grid improves clarity and supports an organised material flow.
Typical Applications
- Subdivide GLTs and large load carriers into individual compartments
- Equip pallet boxes and Paloxes with a structured compartment layout
- Use plastic pallets with plastic pallet collars as compartmentalised load carriers
- Subdivide Euro pallets with suitable plastic or wooden pallet collars
- Store turned parts and milled parts separately
- Sort metal parts, fittings and fasteners
- Separate coated, painted or powder-coated components from one another
- Arrange shafts, pins, bolts and elongated components in rows
- Stage series-production parts for assembly and production
- Separate components by article number, size, variant or process stage
- Prepare order-picking and assembly units
- Structure transport containers for internal reusable logistics cycles
The slot-in divider strip creates fixed compartment positions within the load carrier. This facilitates visual inspection, removal and assignment of components. For recurring applications, multiple containers can be equipped with the same compartment structure.
Advantages of the lock-it© HD MAXI55M Slot-In Divider Strip
The lock-it© HD MAXI55M slot-in divider strip offers a robust yet adaptable alternative to permanently installed dividers. If components, quantities, batch sizes or process workflows change, the compartment division can be replanned, extended or reconfigured. This makes the system suitable both for individual container solutions and for recurring series applications.
Benefits at a Glance
- Flexible compartment division through a 28 mm grid
- Robust 10 mm material thickness
- Low 55 mm compartment wall for easy access to flatter components
- Ideal for GLTs, pallet boxes, Paloxes and large load carriers
- Suitable for pallets with plastic or wooden pallet collars
- 950 mm starting length for medium to larger internal dimensions
- Can be cut to the container internal dimensions
- Modular slot-in design and flexibly combinable
- Uniform and mixed compartment sizes can be created
- Reusable and suitable for reusable containers
- Robust plastic construction for industrial applications
- Improves order and clarity within the load carrier
- Reduces the mixing of different items
- Supports gentle separation of components
- Facilitates order picking, assembly supply and inventory control
- Saves search time in storage, production, workshops and intralogistics
- Virgin material and special colours available on request for specific projects
Particularly in industrial environments, the combination of robust construction, easy adaptation and clear organisation of parts is an important advantage. The slot-in divider strips help to make better use of existing load carriers and adapt compartment positions to the actual component requirements.
Why the 950x55x10 mm Compartment Divider & Separator – MAXI55M Is Useful for GLTs, Pallet Boxes and Large Load Carriers
Large load carriers and pallet boxes provide a large amount of usable interior space. Without compartment division, however, smaller and medium-sized components are often loaded in an unstructured manner. This results in free movement within the container, unclear item allocation and increased effort for removal, inventory control and order picking.
With the MAXI55M slot-in divider strip, a large container becomes a structured load carrier. Individual compartments can be assigned to specific item numbers, component variants, assemblies, customer orders or process stages. The low divider wall is particularly suitable when the parts need to remain easily accessible while still requiring clear lateral separation.
A defined compartment division particularly supports
- Production supply and material staging
- Kanban and replenishment systems
- Order picking and kit formation
- Sequencing of components
- Intermediate storage of semi-finished and finished parts
- Quality Assurance and Inspection Areas
- Goods In and Goods Out
- Reusable transport cycles between plant, supplier and customer
- Spare parts and maintenance logistics
- Workshop and operating equipment organisation
Employees can identify more quickly which part belongs in which compartment and whether a position is already empty. This simplifies inventory control and supports standardised staging at assembly or production workstations.
Component separation, internal organisation and support for positive-fit packing concepts
The MAXI55M slot-in divider strip is primarily used as a compartment divider, separator and divider system within a container or load carrier. The compartment walls organise components, limit free movement within the individual compartments and reduce direct mixing of different items. In this way, the slot-in divider strip can support the formation of an organised load unit and, with a suitable design, help to reduce free spaces within a pallet box or pallet collar.
For recurring series, assembly sequences or pre-picked sets, components can be staged in defined positions. However, the slot-in divider strips do not automatically constitute tested proof of complete load securing on a road vehicle. The container, pallet, plastic pallet collar, fill level, centre of gravity, lid, strapping, interlayers, friction and other securing means must always be matched to the load, vehicle and transport route.
Compartment Dividers, Pallet Boxes and Plastic Pallet Collars in the Context of Load Securing
Please note that the following information on load securing refers to German law,
German technical guidelines and German statutory accident insurance institutions (Berufsgenossenschaften). A compartment divider can separate components from one another within a pallet box, a GLT or a pallet with a plastic pallet collar. For road transport, it must additionally be assessed whether the complete load unit is adequately secured on the vehicle. Section 22 of the German Road Traffic Regulations requires loads, loading equipment and means of load securing to be stowed and secured in such a way that they cannot shift, tip over, roll back and forth or fall off, even during emergency braking or sudden evasive manoeuvres. The recognised rules of technology must be observed.
The VDI 2700 series of guidelines on load securing on road vehicles provides key technical guidance. BG Verkehr explains load distribution and load securing and recommends, among other things, a suitable vehicle, positive-fit stowage wherever possible, the closing of free spaces and – where necessary – additional securing means.
For palletised load units, DGUV Information 208-048 – Securing Palletised Load Units provides further guidance on stresses during transport and stacking as well as on possible securing methods. In addition, BG Verkehr compiles specialist information on loading and unloading, load distribution and the safe handling of vehicles in its “Loading and Securing” topic area.
What the 950x55x10 mm Compartment Divider & Separator – MAXI55M Can Do – and What Must Also Be Checked
- MAXI55M provides: structured compartment division, component separation, defined removal positions and support for organised packing.
- Also to be checked: load capacity of the pallet and container, centre of gravity, load distribution, stability of the complete load unit and securing on the vehicle.
- Depending on the application, the following may be required: lids, strapping, stretch or shrink securing, anti-slip materials, interlayers, padding, edge protection or lashing equipment.
- Important: The specific configuration must be assessed for the particular application; the slot-in divider strip alone does not replace a risk assessment or load securing calculation.
Component Protection Through Separate Compartments
If metal parts, turned parts, milled parts or coated components lie loose in a pallet box, they can knock against one another, rub against one another or become wedged during handling. This can lead to scratches, pressure marks, chipping, contamination or increased inspection and rework effort.
By subdividing the container into individual compartments, the components are mechanically separated from one another. They remain more clearly arranged and can be removed selectively. Particularly for components with sensitive surfaces, the slot-in divider strip can be combined with foam, non-woven material, plastic interlayers or other protective materials.
Typical Components for a MAXI55M Compartment Division
- Turned parts and milled parts
- Stamped and bent metal parts
- Fittings, flanges and fasteners
- Bolts, sleeves, bushes and rings
- Shafts, pins and elongated components
- Plastic parts and injection-moulded parts
- Painted, coated or powder-coated components
- Surface-finished visible parts
- Assembly components and assemblies
- Spare and wear parts
- Technical series-production parts with recurring geometry
The 55 mm height is particularly suitable for components that lie flat or require only low lateral guidance. For taller components or components prone to tipping, higher MAXI variants should be considered.
28 mm Grid for Flexible and Repeatable Compartment Sizes
The 28 mm grid is a central feature of the MAXI55M slot-in divider strip. It enables a systematic arrangement of the intersection points and therefore flexible compartment planning. Depending on the container size and component geometry, narrow, wide, short, elongated or mixed compartments can be created.
The grid allows compartment sizes to be repeated. This is particularly practical when several pallet boxes or large load carriers are to be equipped identically. Once a compartment division has been defined, it can be replicated for additional containers and integrated into series processes.
Possible Compartment Concepts
- Uniform compartments for single-type series-production parts
- Compartments arranged in rows for turned parts, bushes or flanges
- Elongated channels for shafts, pins or profiles
- Wider compartments for assemblies and assembly kits
- Separate areas for different article numbers
- Compartment division by size, variant, colour or processing status
- Compartment division by production or inspection step
- Mixed compartment sizes within a GLT or pallet box
- Partial subdivisions in which only selected areas of the container are compartmentalised
The suitable compartment size should not be based solely on the external dimensions of the component. Grip space, removal direction, tolerances, surface sensitivity, fill level and possible movements during transport must also be taken into account.
Can be cut to container and pallet dimensions
The MAXI55M slot-in divider strip is supplied with a starting length of 950 mm. It can be cut to the required internal dimension. This means that it is not limited to a specific container type, but can be adapted to different pallet boxes, GLTs, crates, pallet collars and special load carriers.
Before cutting, the actual usable internal dimensions should be measured. For pallet boxes and large load carriers, wall contours, reinforcing ribs, slopes, radii, access openings, flaps and existing fittings must be taken into account in addition to length and width. For pallets with plastic pallet collars, it must also be checked how the slot-in divider strips are positioned on the pallet surface and held in place to prevent unwanted shifting.
Suitable for Different Load Carriers
- GLTs and Large Load Carriers
- Plastic pallet boxes
- Paloxes and bulk containers
- Rigid and foldable large containers
- Plastic pallets with plastic pallet collars
- Euro pallets with suitable plastic pallet collars
- Euro pallets with suitable wooden pallet collars
- Industrial crates and transport crates
- Reusable containers and returnable packaging
- Special load carriers with a suitable interior
The cut-to-size design is particularly advantageous when different load carrier sizes are used within the operation or when a specific compartment structure is required for a particular component.
PP/PE Recycled Material Mix
The lock-it© HD MAXI55M slot-in divider strip is made from a PP/PE recycled material mix as standard. The material is suitable for numerous standard applications in warehousing, production, workshops, intralogistics and transport. The plastic version is resistant to moisture, robust and suitable for repeated use in reusable containers.
The recycled material mix provides an economical and resource-efficient solution for many industrial applications. Virgin material can be requested for specific projects. According to the product information, a minimum total weight of 500 kg must be taken into account for both virgin material and special colours.
Special colours can be useful when compartment systems, item groups, customers, production lines or process stages are to be visually identified. The specific material and colour specification should be agreed before ordering.
Use in Pallet Boxes, Paloxes and Large Load Carriers
Pallet boxes and Palox containers are often used for loose, heavy or bulky goods. For smaller technical components, however, the available interior often remains unstructured without compartment grids. The MAXI55M slot-in divider strip enables a clearly structured internal division without the need to design a fixed custom compartment grid for every application.
Typical Applications in Pallet Boxes and GLTs
- Stage series-production parts in fixed rows
- Separate different item variants within a container
- Sort turned and milled parts by dimension
- Separate coated components from one another
- Arrange assembly components in a defined sequence
- Buffer semi-finished parts between processing steps
- Keep inspection parts and approved parts separate
- Collect returned parts, rework parts and good parts in separate areas
- Standardise reusable containers for internal plant transport
Due to the low height, access remains comparatively good even in deep containers. For multi-layer or very tall components, MAXI55M can be combined with interlayers or higher compartment divider variants, provided that the design is suitable for the application.
Plastic Pallets as a Base for Pallet Collars and 950x55x10 mm Compartment Divider & Separator – MAXI55M Compartment Divider
A pallet collar is always used in combination with a suitable pallet. The pallet therefore forms a functional part of the overall system comprising the pallet, pallet collar and compartment divider. The plastic pallet forms the load-bearing base, the pallet collar limits the load unit laterally and the lock-it© HD MAXI55M slot-in divider strips subdivide the interior into defined compartments.
Suitable load carriers can be found in the product category Plastic Pallets for Storage, Transport and Plastic Pallet Collar Systems. For standardised Euro load units, plastic pallets 1200×800 mm in Euro pallet format are particularly suitable, provided that the load capacity, deck design and operating conditions are appropriate for the application.
In combination with a suitable plastic pallet collar or pallet frame, an open pallet can be extended into a structured transport, storage and staging system. The pallet collars can be made of plastic or wood. It is essential that the internal dimensions, pallet surface, frame construction, component weight and planned compartment division are coordinated with one another.
The cut-to-size MAXI55M slot-in divider strips can be arranged longitudinally and transversely. This creates defined holding areas for turned parts, milled parts, shafts, fittings, cartons, trays or technical components. The combination is particularly suitable for reusable logistics, order picking, production supply and internal transport.
Benefits of Combining a Pallet, Pallet Collar and Compartment Divider
- Existing pallets can be used as modular load carriers
- Compartment sizes can be adapted to components and quantities
- Components remain more clearly arranged within the pallet footprint
- Item variants and processing statuses can be kept separate
- The load unit is suitable for storage, order picking and internal transport
- Pallet collars and slot-in divider strips can be integrated into reusable logistics cycles
- When products change, the compartment division can be adapted or replaced
For applications in Euro format, suitable load carriers can be found in the Plastic Pallets category. Foldable and reusable frames can be found in the Plastic Pallet Collars and Pallet Frames category.
Use in Warehousing and Intralogistics
In warehousing and intralogistics, components must be clearly assigned, quickly located and safely moved between different process stations. The MAXI55M slot-in divider strip structures the interior of large load carriers and supports fixed item positioning.
Typical Areas of Application in Warehouse Logistics
- Series-production parts storage
- Spare Parts Storage
- Kanban and supermarket areas
- Order-Picking Stations
- Goods In and Goods Out
- Production Supply
- Intermediate and buffer storage
- Quality Assurance
- Shipping Preparation
- Empty-container and reusable packaging management
A structured load carrier saves search time and facilitates inspection. If identical compartments are used in several containers, item positions, quantities and removal sequences can be standardised.
Use in Production and Assembly
In production, components are often provided directly at machines, machining centres or assembly lines. Loose parts in a pallet box make it more difficult to maintain an overview and can lead to mix-ups. With a MAXI55M compartment division, components can be arranged according to work step, variant or assembly sequence.
Potential Applications in Production and Assembly
- Provision of Assembly Components
- Sorting by operation or processing status
- Separation of similar item variants
- Creation of assembly kits and assembly sets
- Supply of machines and assembly lines
- Interim Storage of Semi-Finished Parts
- Organisation of inspection and approved parts
- Prototype construction and small-series production
- Standardised staging in series production
- Return of empty reusable containers with reusable compartment division
For recurring processes, each load carrier can be configured in the same way. This facilitates familiarisation, reduces mix-ups and supports visually traceable process management.
Use for Turned Parts, Milled Parts and Metal Components
The MAXI55M slot-in divider strip is particularly suitable for applications in metalworking. Turned parts, milled parts, bushes, rings, flanges and fittings can be arranged in individual compartments or rows. The defined separation reduces direct mixing and facilitates removal for subsequent machining, inspection or assembly processes.
Uniform compartments can be created for round or rotationally symmetrical components. Mixed compartment sizes are possible for different diameters or variants. It is important to provide sufficient clearance for inserting and removing the components without creating unnecessarily large spaces for movement.
Typical Applications in Metalworking
- Sort turned parts by diameter or article number
- Separate milled parts by processing stage
- Stage bushes, rings and flanges in fixed positions
- Keep good parts, inspection parts and rework spatially separated from one another
- Transport workpieces between machining centres
- Pre-pick finished parts for packaging and dispatch
- Organise standard parts and fasteners in larger load carriers
Use for Coated, Painted and Powder-Coated Components
Components with sensitive surfaces require particularly careful separation. Painted, electroplated, coated or powder-coated parts can be damaged by direct contact. The MAXI55M slot-in divider strip creates defined compartment boundaries and reduces direct contact between adjacent components.
The plastic slot-in divider strip provides mechanical separation but does not replace soft protective packaging. Depending on the surface requirements, a combination with non-woven material, foam, protective films, plastic sheets or suitable interlayers may be appropriate. For visible parts and high-quality surfaces, the compartment geometry should be designed to take edges, corners and contact points into account.
Use for Shafts, Pins and Elongated Components
With a longitudinally aligned compartment structure, the MAXI55M slot-in divider strip can also be used to organise shafts, pins, bolts, profiles and other elongated components. Parallel slot-in divider strips form individual channels in which the components lie separately side by side.
For shafts or bars lying flat, the 55 mm height can provide low lateral guidance. For heavy, rolling or tall parts, it must be checked whether additional securing measures, higher slot-in divider strips, support prisms, interlayers or another structural solution are required.
Possible Applications for Elongated Parts
- Store shafts and axles in parallel rows
- Separate pins and bolts by length or diameter
- Stage small profiles and bars in an organised manner
- Transport machined round parts between production stages
- Arrange series-production parts in a defined quantity per compartment
Use in Workshops and Maintenance
Larger crates, pallet boxes or pallet-based containers are also used in workshops and maintenance for spare parts, operating supplies and repair components. The MAXI55M slot-in divider strip enables these load carriers to be organised more clearly.
Typical Workshop Applications
- Sort spare parts by system or machine
- Assemble repair and maintenance kits
- Separate fittings, flanges and fasteners
- Organise tool accessories and operating equipment
- Stage wear parts in an organised manner
- Store removed parts and replacement parts separately
- Structure mobile material crates for maintenance operations
A fixed compartment assignment helps to check stock levels more quickly and identify missing parts at an early stage. Particularly for recurring maintenance tasks, a standardised compartment structure can simplify preparation.
Use in Internal Transport and Reusable Logistics Cycles
During internal transport, loose components can shift and become mixed in pallet boxes or GLTs. With the MAXI55M compartment division, item groups remain better separated from one another. This facilitates transfer between warehousing, production, assembly, quality assurance and dispatch.
The robust plastic construction is suitable for recurring applications. Within closed reusable logistics cycles, load carriers can be used repeatedly with the same compartment structure. This is particularly practical when components regularly circulate between supplier, plant, processing station and customer.
For sensitive or heavy components, the compartment division should be combined with suitable lids, interlayers, padding materials or additional securing elements. The specific configuration depends on weight, centre of gravity, surface, transport route and handling.
Industries and Typical Areas of Application
The lock-it© HD MAXI55M slot-in divider strip can be used across industries wherever technical components need to be organised, separated and provided in a repeatable manner in pallet boxes, pallet collars or GLTs. Depending on the operation and application, the system is also referred to as a compartment divider, separator, compartment grid, slot-in divider strip, divider comb, subdivider, compartment insert or component divider system.
Typical Industries
- Automotive, Vehicle Manufacturing and Automotive Supplier Industry
- Mechanical Engineering, Plant Engineering and Special-Purpose Machinery
- Metalworking, Turning, Milling and Machining
- Toolmaking, Mould Making and Fixture Construction
- Plastics Processing and Injection Moulding
- Surface Technology, Painting, Electroplating and Powder Coating
- Electrical Engineering, Electronics Manufacturing and Equipment Manufacturing
- Assembly, Production and Contract Packing Operations
- Intralogistics, Warehouse Technology and Logistics Services
- Spare Parts Logistics, Workshop and Maintenance
- Technical Trade and Industrial Distribution
- Packaging Technology, Reusable Logistics and Container Management
Automotive and Vehicle Manufacturing
In the automotive industry and among suppliers, compartment dividers can be used for brackets, flanges, fittings, stamped parts, plastic components and pre-assembled assemblies. Identical compartment grids support repeatable container concepts for production supply, sequencing, quality assurance and internal plant transport.
Mechanical Engineering, Metalworking and Machining
Turned parts, milled parts, bushes, rings, shafts and machined workpieces can be separated by article number, dimension or processing status. The robust slot-in divider strip is suitable for pallet boxes and large load carriers in which smaller metal parts would otherwise be loosely mixed.
Surface Technology, Painting and Powder Coating
For painted, galvanised or powder-coated components, a separator reduces direct contact between adjacent parts. For high-quality visible surfaces, the compartment grid can be combined with foam, non-woven material or additional protective layers.
Plastics Processing, Electrical Engineering and Equipment Manufacturing
Injection-moulded parts, housings, connectors, assemblies and technical components can be staged in defined compartments. This facilitates variant management, kit formation and the supply of assembly workstations.
Intralogistics, Reusable Transport Cycles and Spare Parts Logistics
In storage and reusable logistics processes, a standardised compartment division ensures clear item positions. Pallet boxes, GLTs or pallets with plastic pallet collars can be prepared for recurring cycles between supplier, production, assembly, service and customer.
MAXI55M Compared with Other MAXI Variants
The MAXI series is available in various heights and lengths. The suitable version depends on component height, component weight, the required lateral guidance, container internal dimensions and transport stresses.
MAXI55M has a height of 55 mm and a thickness of 10 mm. The variant is particularly suitable for low to medium-height components and an easily accessible compartment structure. Higher MAXI variants provide greater lateral guidance and are useful when components stand taller, tip more easily or need to be more clearly separated from one another.
Possible Additional MAXI Heights
- MAXI120 – 750×120 mm for medium-height components and greater lateral guidance
- MAXI180 – 750×180 mm for taller components and more deeply divided compartment structures
- MAXI200 – 750×200 mm for particularly high divider walls and large load carriers
The selection of the suitable variant depends on
- Component height and component geometry
- Component Weight
- Required Lateral Guidance
- Container height and usable internal dimensions
- Number and size of the compartments
- Transport route and handling
- Surface sensitivity
- Stacking and reusable logistics concept
- Manual or Automated Use
- Required accessibility during removal
The MAXI variants with heights of 55 mm and 120 mm use a 28 mm grid. The higher variants with heights of 180 mm and 200 mm use a 37 mm grid. This means that they differ not only in compartment wall height but also in the possible grid spacing.
950 mm Starting Length Compared with 750 mm and 1150 mm
Depending on the variant, the MAXI slot-in divider strips are available in different starting lengths. The 950 mm version described here offers more usable starting length than the compact 750 mm variant and is particularly suitable for medium to larger pallet boxes, pallet collars and GLT internal dimensions. For smaller areas, the 750 mm version may be sufficient; for particularly large internal dimensions, a 1150 mm variant may be suitable.
The decisive factor is the actual usable internal dimension of the load carrier. A longer strip can be cut to size but may result in more offcut material. A strip that is too short cannot fully span the intended area. When planning, therefore, not only the external dimensions of the container but also the actual internal contour should be taken into account.
An overview of available heights and lengths can be found in the category MAXI – lock-it© Compartment Dividers for GLTs and Pallet Boxes.
MINI System or MAXI System?
The MINI system is designed for AKL containers, KLTs, Euro containers, standard containers, drawers and smaller to medium-sized components. It uses a material thickness of 5 mm and a 20 mm grid. This makes it particularly suitable for fine compartment divisions and compact containers.
The MAXI system is designed for GLTs, pallet boxes, Palox containers, pallet collars, large load carriers and larger compartment structures. The slot-in divider strips are made in a more robust design and are available in different heights. With a thickness of 10 mm and a height of 55 mm, MAXI55M provides a robust, low divider wall for easily accessible compartments.
In Brief
- MINI system: for AKL, KLTs, Euro containers, small parts and fine compartment divisions.
- MAXI system: for GLTs, pallet boxes, plastic pallet collars, larger load carriers and robust compartment structures.
For smaller containers and finer compartment divisions, suitable variants can be found in the category MINI – lock-it© Compartment Dividers.
Combination with Plastic Pallets, Euro Pallets and Plastic Pallet Collars
Plastic pallets, Euro pallets and suitable pallet collars, together with the slot-in divider strips, form a modular load unit. The MAXI55M slot-in divider strip can be combined as an internal division with a suitable pallet and matching pallet collar. The pallet forms the load-bearing base, the pallet collar limits the load unit laterally and the compartment dividers or separators structure the usable interior. In this way, standardised components create an adaptable load carrier for storage, order picking, production supply and internal transport.
| Component | Function in the System | Suitable Internal Selection |
|---|---|---|
| Pallet | Load-bearing base of the load unit; selection according to format, load capacity and material handling technology | Plastic Pallets for Storage and Transport |
| Pallet Collar | Lateral containment on Euro or half pallets; foldable and stackable depending on the design | Plastic Pallet Collars and Pallet Frames |
| MAXI55M Compartment Divider | Subdivides the interior into defined compartments for components, assemblies or item variants | MAXI – lock-it© Compartment Dividers and Separators |
| Interlayer | Separates layers, distributes loads or protects component surfaces | Pallet Interlayers, Separator Sheets and Layer Pads |
| Protective Material | Adds soft contact surfaces, padding or technical cut-to-size parts | Plastic, Foam and Rubber Sheets |
For Euro load units, for example, a plastic pallet 1200×800 mm can be combined with a plastic pallet collar 1200×800 mm. Whether these specific versions are suitable for the weight, transport route and stacking concept must be assessed on the basis of the respective technical data and the complete load unit.
Further Internal Product Areas
- Plastic Compartment Grids, Compartment Dividers and Separators for additional separation systems and individual compartment grid solutions
- MAXI – lock-it© Compartment Dividers for other heights, lengths and robust large-container applications
- MINI – lock-it© Compartment Dividers for KLTs, Euro containers and finer compartment divisions
- Plastic Pallets for Euro, industrial, half-pallet and special formats
- Plastic Pallet Collars as foldable lateral containment for pallet-based systems
Planning a Suitable Compartment Division
To ensure that the MAXI55M slot-in divider strip can be used optimally, several technical points should be clarified before ordering and cutting. The more precisely the container, component and process are known, the better the appropriate compartment structure can be planned.
Important information for your inquiry
- Which load carrier is being used?
- Is it a GLT, pallet box, Palox, crate or pallet with a pallet collar?
- What are the usable internal dimensions of the container?
- Are there ribs, slopes, flaps or other internal contours?
- How large and how heavy are the components?
- What geometry do the components have?
- Are the surfaces sensitive, painted, coated or powder-coated?
- How Many Compartments Are Required?
- Should All Compartments Be the Same Size?
- How are the components to be inserted and removed?
- Are the components arranged flat, upright or lengthwise?
- Is the load carrier only stored or also transported?
- Are containers or load units stacked?
- Is a lid or an interlayer planned?
- Is colour coding or a special colour required?
- Is Virgin Material Required?
- Are there any cleaning or hygiene requirements?
- Will the System Be Used Manually or Automatically?
- What is the planned quantity?
For simple applications, a standardised compartment division is often sufficient. For heavy, sensitive or geometrically complex components, individual planning with additional securing, padding or a different compartment divider height may be appropriate.
When Is the 950x55x10 mm Compartment Divider & Separator the Right Choice?
The lock-it© HD MAXI55M slot-in divider strip is particularly suitable when a robust, low and flexibly adaptable subdivision is required for larger load carriers. It is well suited to low-profile and medium-height components that need to be clearly separated in pallet boxes, GLTs, Palox containers, crates or pallets with pallet collars.
The 950x55x10 mm Compartment Divider & Separator – MAXI55M variant is particularly suitable when
- a low compartment wall with good accessibility is required,
- a robust 10 mm slot-in divider strip is required,
- a 28 mm grid is suitable for compartment planning,
- GLTs, pallet boxes, Paloxes or plastic pallet collars are used,
- small to medium-sized technical components need to be separated,
- turned parts, milled parts, shafts or fittings need to be organised,
- coated or powder-coated components need to be separated from one another,
- the compartment division needs to be cut to an individual internal dimension,
- uniform or mixed compartment sizes are required,
- multiple load carriers need to be equipped identically,
- organisation, quick removal and visual inspection are important,
- a reusable solution for reusable logistics processes is required.
If taller components require greater lateral guidance, a MAXI120, MAXI180 or MAXI200 variant should be considered. For smaller containers and finer compartment divisions, the MINI system is often more suitable.
Further Technical Information on Load Securing
- VDI – VDI 2700 Load Securing on Road Vehicles
- BG Verkehr – Load Distribution and Load Securing
- BG Verkehr – Loading and Load Securing Resources
- DGUV Information 208-048 – Securing Palletised Load Units
- DGUV Regulation 70 – Vehicles
- Section 22 StVO – Load Securing
The linked specialist information refers to German law and German institutions and is provided for general guidance only. The specific load securing required must be assessed for the respective load, the complete load unit, the vehicle used and the intended transport route.
Enquiries and Advice
If you would like to equip GLTs, pallet boxes, Paloxes, crates or pallets with pallet collars with lock-it© slot-in divider strips, ideally send us details of the load carrier, usable internal dimensions, required compartment division, component size, component weight, surface, quantity, colour, material requirements and application.
On this basis, it can be checked whether the MAXI55M slot-in divider strip is suitable or whether a different length, height or an individual compartment grid solution is better suited to your application.
FAQ – Frequently Asked Questions About the MAXI55M Slot-In Divider Strip
What Is a Compartment Divider or Separator?
A compartment divider or separator is a dividing element used to divide a container or load carrier into individual compartments. With MAXI55M, several cut-to-size slot-in divider strips are combined longitudinally and transversely to create a variable compartment grid for components.
How Can I Subdivide a Pallet Box?
First, the usable internal dimensions and the dimensions of the components are determined. The MAXI55M slot-in divider strips are then cut to size and slotted together via the 28 mm grid to form longitudinal and transverse compartments. Ribs, slopes, flaps and the required gripping space must be taken into account during planning.
What Do the Dimensions 950x55x10 mm Mean?
950 mm refers to the starting length of the slot-in divider strip, 55 mm to the height of the compartment wall and 10 mm to the material thickness. The strip can be cut to a shorter internal dimension.
Is MAXI55M a Plastic Compartment Divider, a Separator, a Compartment Grid or a Slot-In Divider Strip?
The individual MAXI55M strip is a plastic slot-in divider strip and can be referred to as a compartment divider or separator. Several cut-to-size strips slotted together form the actual compartment grid, divider comb or compartment division within the container.
Which Containers and Crates Are the MAXI55M Separator Slot-In Divider Strips Suitable For?
The slot-in divider strips are particularly suitable for GLTs, pallet boxes, Paloxes, large load carriers, industrial crates, transport crates and pallets with a suitable pallet collar. The decisive factors are the actual usable internal dimensions, the internal contour as well as the weight, geometry and removal direction of the components.
What Role Does Plastic Play in a Compartment Divider or Separator?
Plastic describes the material and complements the actual product search for compartment dividers, separators, compartment grids or slot-in divider strips. The PP/PE version is not sensitive to moisture, robust, can be cut to size and is suitable for recurring applications in reusable containers. Whether it is suitable for specific temperature, hygiene, ESD or chemical requirements must be assessed for the application.
What Is the 950x55x10 mm Compartment Divider & Separator Used For?
The compartment divider & separator is used for the flexible subdivision of GLTs, pallet boxes, Paloxes, large load carriers, crates and pallets with pallet collars. It helps to store, stage and internally transport technical components, turned parts, milled parts, shafts, fittings and series-production parts in an organised manner.
What Does lock-it© HD MAXI55M Mean?
MAXI55M denotes a slot-in divider strip variant within the robust lock-it© HD MAXI system. The strip is 950 mm long, 55 mm high, 10 mm thick and has a 28 mm grid.
What Is the Item Number of the MAXI55M Slot-In Divider Strip?
The item number for the 950x55x10 mm version is 40012.
Which Containers Is the MAXI55M Slot-In Divider Strip Suitable For?
It is particularly suitable for GLTs, pallet boxes, Paloxes, large load carriers, transport crates and pallet-based systems with suitable plastic pallet collars. Depending on the internal dimensions and application, it can also be used in other containers.
Can MAXI55M Be Used on Plastic Pallets?
Yes, the slot-in divider strip can be used on plastic pallets in a suitably planned system, for example in combination with a plastic pallet collar. The decisive factors are the pallet surface, internal dimensions, component weight and secure positioning of the compartment division.
Can MAXI55M Be Used on Euro Pallets with Wooden Pallet Collars?
Yes, it can be used on Euro pallets with suitable wooden pallet collars if the internal dimensions and the planned compartment structure are compatible. The slot-in divider strips must be cut to size for the respective configuration and positioned appropriately for the application.
Can the Slot-In Divider Strip Be Cut to Size?
Yes, the 950 mm long slot-in divider strip can be cut to the required internal dimension. This allows individual compartment grids and compartment sizes to be created for different load carriers.
What Grid Does the MAXI55M Slot-In Divider Strip Have?
The MAXI55M slot-in divider strip has a 28 mm grid. This grid enables the modular combination of several slot-in divider strips and repeatable compartment spacing.
Why Is a 28 mm Grid Used for MAXI55M?
The 28 mm grid enables a relatively fine compartment division within the robust MAXI system. It is particularly suitable for the low MAXI variants with heights of 55 mm and 120 mm respectively. Higher MAXI variants with heights of 180 mm and 200 mm use a 37 mm grid.
What Material Is the Slot-In Divider Strip Made From?
The standard version is made from a PP/PE recycled material mix. Virgin material can be considered on request from a minimum total weight of 500 kg.
What Colour Is the Slot-In Divider Strip?
The standard colour is black. Special colours are available on request from a minimum total weight of 500 kg.
How High and How Thick Is MAXI55M?
The slot-in divider strip is 55 mm high and 10 mm thick. This combines a low, easily accessible compartment wall with a robust material construction.
Which Components Is MAXI55M Particularly Suitable For?
MAXI55M is particularly suitable for low-profile to medium-height technical components, turned parts, milled parts, bushes, rings, flanges, fittings, shafts, pins, plastic parts and coated or powder-coated components.
Is MAXI55M Suitable for Sensitive Surfaces?
The slot-in divider strip mechanically separates components from one another and can thereby reduce direct contact. For particularly sensitive, painted or coated surfaces, additional protective materials such as non-woven material, foam or interlayers should be considered.
What Is the Difference Between MAXI55M and MAXI120?
MAXI55M has a height of 55 mm and is suitable for low, easily accessible compartment structures. MAXI120 is 120 mm high and provides greater lateral guidance for taller components. Both heights use a 28 mm grid within the MAXI series.
When Should I Choose MAXI180 or MAXI200?
A higher MAXI variant is suitable when components are significantly taller, stand upright, are more prone to tipping or require greater lateral separation. MAXI180 and MAXI200 use a 37 mm grid.
What Is the Difference Between MINI and MAXI?
MINI is designed for AKL, KLTs, Euro containers, drawers and finer small-parts compartment divisions. MAXI is suitable for GLTs, pallet boxes, Paloxes, plastic pallet collars and larger or more robust compartment structures.
Can the Slot-In Divider Strip Be Reused?
Yes, the plastic slot-in divider strip is suitable for recurring applications and can be used in reusable containers or closed-loop systems.
Is the Slot-In Divider Strip Suitable for Series Applications?
Yes, MAXI55M is suitable both for individual container solutions and for recurring applications in warehousing, production, assembly, order picking and intralogistics. Identical compartment layouts can be reproduced in multiple load carriers.
Does the Compartment Divider Replace Complete Load Securing?
No. The slot-in divider strip structures and separates components within the load carrier. Depending on weight, centre of gravity, transport route and load unit, additional measures such as lids, interlayers, strapping, anti-slip materials, padding or lashing equipment may be required.
Can the Compartment Divider Reduce Free Space in a Load Unit?
Yes, a suitably designed compartment division can reduce free movement between individual components within the container. However, whether this results in adequate positive-fit securing must be assessed for the complete load unit and the intended transport.
Which Official Information on Load Securing Is Helpful?
The following guidance refers to German law and German institutions. Orientation is provided, among other things, by Section 22 of the German Road Traffic Regulations, VDI 2700, the BG Verkehr guidance on load distribution and load securing, and DGUV Information 208-048.
Can the 950x55x10 mm Compartment Divider & Separator – MAXI55M Be Combined with Plastic Pallets and Pallet Collars?
Yes. In a suitably planned system, the pallet forms the load-bearing base, the pallet collar the lateral boundary and MAXI55M the internal division. Load capacity, internal dimensions, pallet surface, compartment positioning and securing of the entire load unit must be compatible.
Can Interlayers or Foam Be Used in Addition?
Yes. Plastic interlayers, non-woven material, foam or other suitable protective materials can separate layers, cushion contact surfaces and provide additional protection for sensitive surfaces.
